Tag Archive for springer

Antique Replica Black Copper 30 20 Stock Length Harley Springer Fork Front End

Antique Replica Black Copper 30 20 Stock Length Harley Springer Fork Front End
Antique Replica Black Copper 30 20 Stock Length Harley Springer Fork Front End
Antique Replica Black Copper 30 20 Stock Length Harley Springer Fork Front End
Antique Replica Black Copper 30 20 Stock Length Harley Springer Fork Front End

Antique Replica Black Copper 30 20 Stock Length Harley Springer Fork Front End
MOST HARLEY DAVIDSON MODELS WITH 1 STEM, CUSTOM APPLICATIONS SUCH AS BOBBER OR CHOPPER, & MANY OTHER CUSTOM MOTORCYCLE FRAMES, ETC.. BE SURE TO CHECK YOUR BIKE OR BUILD TO ENSURE FIT!! NOTICE OUR MANUFACTURING OF THIS REPLICA V-TWIN SPRINGER FRONT END COMES COMPLETE AND INCLUDES UPPER AND LOWER BRASS ZERK GREASE FITTINGS, WITH COPPER TOP TREE CLAMP. TOP CROWN NUT, A 3/4 FRONT AXLE KIT WHICH INCLUDES: AXLE, (2). ACORN STYLE END NUTS, WHEEL SPACERS THAT CAN BE CUT TO REQUIRED LENGTH, & VARIOUS WASHERS/SHIMS. (PLEASE NOTE WHEEL SPACERS MAY NOT BE THE CORRECT SIZE FOR YOUR BIKE OR PROJECT). THIS LENGTH IS CONSIDERED 20 WHICH IS MEASURED FROM THE. CENTER OF AXLE TO BOTTOM OF LOWER TREE WHERE TREE OR 21 IF YOU MEASURE TO THE BEARING. SOME CALL IT A 30 SPRINGER WHICH IS MEASURING OVERALL LENGTH FROM THE AXLE TO THE TOP OF THE SPRINGS. ITS ACTUALLY CLOSER TO 31. WE CONSIDER THIS STOCK LENGTH “STOCK”, HOWEVER OF A FLST FOR EXAMPLE THIS IS STOCK LENGTH. WORKS BEST ON STOCK RIGID AND SOFTAIL FRAMES USING EITHER A 16″ OR 21″ WHEEL. THIS IS THE FRONT END SIZE WE USE ON MOST OF OUR BOBBERS. REPLICA RESTORATION LENGTH ON ANTIQUE HARLEY EL FL FLH KNUCKLEHEAD PANHEAD SHOVELHEAD MODELS WAS EVEN LOWER THAN THIS UNIT MEASURING 18″/28″ SO THIS WOULD BE CONSIDERED 2 OVER COMPARED TO A STOCK KNUCKLEHEAD FOR EXAMPLE. (CENTER OF AXLE TO BOTTOM OF LOWER TREE OR 21 TO WHERE TREE SITS AGAINST THE BEARING). APPROXIMATE TOTAL LENGTH: 30″-31″. INSIDE WIDTH OF ROCKERS: APPROX. AXLE DIAMETER: 3/4 O. TECH NOTE: INSTALLATION ON SOME STOCK MODELS LIKE DYNA, TOURING, SPORTSTER, ETC MAY REQUIRE FRAME AND/OR TANK MODIFICATION AS WELL AS REPLACEMENT OF OTHER COMPONENTS. TECH NOTE: IF USING AN AFTERMARKET/CUSTOM FRAME WITH EXTERNAL NECK CUPS YOU MAY HAVE TO LATHE OR TRIM THE SPRINGER RETAINING NUT DOWN FOR PROPER FITMENT OF TOP TREE CLAMP AND CROWN NUT! The item “Antique Replica Black Copper 30 20 Stock Length Harley Springer Fork Front End” is in sale since Monday, August 26, 2019. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Brakes & Suspension\Complete Suspension Units”. The seller is “americanclassicmotors” and is located in Zieglerville, Pennsylvania. This item can be shipped worldwide.
  • UPC: Does Not Apply
  • Brand: MID-USA
  • Color: Black/Copper
  • Style: Replica
  • Size: 20″
  • Manufacturer Warranty: Yes
  • Manufacturer Part Number: 35247
  • Placement on Vehicle: Front
  • Surface Finish: Black/Copper
  • Custom Bundle: No
  • Warranty: Yes
  • Modified Item: No
  • Non-Domestic Product: No
  • Harley-Davidson®: REPLICA SPRINGER FRONT END

Antique Replica Black Copper 30 20 Stock Length Harley Springer Fork Front End

Black Narrow Springer Front End -4 Under Stock Length For Harley & Custom Bikes

Black Narrow Springer Front End -4 Under Stock Length For Harley & Custom Bikes
Black Narrow Springer Front End -4 Under Stock Length For Harley & Custom Bikes

Black Narrow Springer Front End -4 Under Stock Length For Harley & Custom Bikes
SPRINGER FRONT END FOR HARLEYS AND CUSTOM APPLICATIONS. SPRINGER INCLUDES: 3/4 AXLE WITH SPACERS AND HARDWARE. AVAILABLE LENGTHS: 4″ UNDER, 2″ UNDER, STOCK LENGTH (22″ FROM THE BOTTOM OF THE NECK TO THE CENTER OF THE AXLE), +2″ OVER, +4 OVER. NOTE: SPRINGER RUNS SPOOL TYPE WHEEL. WILL FIT MOST ALL HARLEY-DAVIDSON AND CUSTOM FRAME APPLICATIONS WITH 1 BEARING ON THE NECK. FRONT END IS BUILD COMPLETE READY FOR INSTALLATION. NOTE: SPRINGER DOES NOT REQUIRE A FORK STOP KIT. The item “BLACK NARROW SPRINGER FRONT END -4 UNDER STOCK LENGTH FOR HARLEY & CUSTOM BIKES” is in sale since Thursday, May 20, 2021. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Brakes & Suspension\Complete Suspension Units”. The seller is “mototeks” and is located in Los Angeles, California. This item can be shipped worldwide.
  • Modified Item: No
  • Custom Bundle: No
  • Surface Finish: BLACK
  • Manufacturer Part Number: Does Not Apply
  • Placement on Vehicle: Front
  • Brand: Mototeks
  • Non-Domestic Product: No
  • Warranty: 1 Year

Black Narrow Springer Front End -4 Under Stock Length For Harley & Custom Bikes

Black Narrow Springer Front End +2 Over Stock Length For Harley & Custom Bikes

Black Narrow Springer Front End +2 Over Stock Length For Harley & Custom Bikes
Black Narrow Springer Front End +2 Over Stock Length For Harley & Custom Bikes

Black Narrow Springer Front End +2 Over Stock Length For Harley & Custom Bikes
SPRINGER FRONT END FOR HARLEYS AND CUSTOM APPLICATIONS. SPRINGER INCLUDES: 3/4 AXLE WITH SPACERS AND HARDWARE. AVAILABLE LENGTHS: 4″ UNDER, 2″ UNDER, STOCK LENGTH (22″ FROM THE BOTTOM OF THE NECK TO THE CENTER OF THE AXLE), +2″ OVER, +4 OVER. NOTE: SPRINGER RUNS SPOOL TYPE WHEEL. WILL FIT MOST ALL HARLEY-DAVIDSON AND CUSTOM FRAME APPLICATIONS WITH 1 BEARING ON THE NECK. FRONT END IS BUILD COMPLETE READY FOR INSTALLATION. NOTE: SPRINGER DOES NOT REQUIRE A FORK STOP KIT. The item “BLACK NARROW SPRINGER FRONT END +2 OVER STOCK LENGTH FOR HARLEY & CUSTOM BIKES” is in sale since Thursday, May 20, 2021. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Brakes & Suspension\Complete Suspension Units”. The seller is “mototeks” and is located in Los Angeles, California. This item can be shipped worldwide.
  • Modified Item: No
  • Custom Bundle: No
  • Surface Finish: BLACK
  • Manufacturer Part Number: Does Not Apply
  • Placement on Vehicle: Front
  • Brand: Mototeks
  • Non-Domestic Product: No
  • Warranty: 1 Year

Black Narrow Springer Front End +2 Over Stock Length For Harley & Custom Bikes

Springer Front End Stock Length (22) Wishbone For Harley & Custom Bike New

Springer Front End Stock Length (22) Wishbone For Harley & Custom Bike New
Springer Front End Stock Length (22) Wishbone For Harley & Custom Bike New
Springer Front End Stock Length (22) Wishbone For Harley & Custom Bike New
Springer Front End Stock Length (22) Wishbone For Harley & Custom Bike New
Springer Front End Stock Length (22) Wishbone For Harley & Custom Bike New
Springer Front End Stock Length (22) Wishbone For Harley & Custom Bike New
Springer Front End Stock Length (22) Wishbone For Harley & Custom Bike New
Springer Front End Stock Length (22) Wishbone For Harley & Custom Bike New

Springer Front End Stock Length (22) Wishbone For Harley & Custom Bike New
SPRINGER FRONT END STOCK LENGTH (22) WISHBONE FOR HARLEY & CUSTOM BIKE NEW. This product data sheet is originally written in English. Air Intake Duct / Tube. Bar Ends / Swingarm Spools. Brake Pedal / Gear Shift lever. Foot Pegs / Bracket Footrest. Gas / Reservoir caps. Handlebar / Handlebar Risers. Lowering Kits / Links. Mirrors / Mirror Base Plates. Turn Signal Lenses / Lights. Upper Fairing Stay Brackets. You may also like. Improtant: Measure from the bottom neck bearing down to the axle. As a reference, on this springer that measurement is 22, considered as the stock size. Heavy duty, one piece forged rear legs. Precision fit bronze rocker bushings for long life. TIG welded alloy steel construction for strength and durability. Spool wheel must have a max of 3-3/4 Hub. 9.5 between rockers where the axle goes between. Includes a 1″ diameter steering stem, 3/4″ diameter axle, and wheel spacers. You can run other wheels (Narrow Glide, etc) but you will need to cut your own wheel spacers in order to do so. The top tree accepts 1/2″-20 fine thread risers and the riser spacing is 4.75″ center to center (same as OEM Harley Springers) keep that in mind when purchasing handlebars. 2004 & newer Harley Sportsters because of turning radius and fork lock interference. Dyna wide glide or narrow glide. Thank You For Your Business. Please keep the return item(s) in their retail packaging as if new. We are unable to accept any items that have been used or unable to resell. Submit A Claim In Just 3 Easy Steps. Step 2: Send the item back or send us pictures for testing and inspection. What Is Not Covered. Physical damage caused by abuse or misuse. Failures due to fire or water. Damage caused from installation. HTT Group LLC, located in Los Angeles County, California, is an international trading and manufacture representative company specialized in motorcycle parts and accessories production and services. We have our own production base in China and our products have been marketed to many countries in the world. We sells standard parts and accessories for motorcycles, but also follows the new market trends closely and takes orders for customized product designs and productions, provided by our exclusive products supplier in China. We are committed to resolve all issues in a friendly and satisfactory manner. If you do not get a response from us, please kindly check your junk or spam mailbox. Our store location is. 337 Paseo Sonrisa, Walnut, CA 91789. You are welcome to visit. The item “SPRINGER FRONT END STOCK LENGTH (22) WISHBONE FOR HARLEY & CUSTOM BIKE NEW” is in sale since Wednesday, November 4, 2020. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Bodywork & Frame\Fairings & Panels”. The seller is “mt-goodparts” and is located in Walnut, California. This item can be shipped worldwide.
  • Brand: HTTMT
  • Manufacturer Part Number: US-TGHD-SF002-II-CD+BK
  • UPC: 617949607902

Springer Front End Stock Length (22) Wishbone For Harley & Custom Bike New

22 Stock Length Springer Front End For Harley Sportster Chopper Softail Arched

22 Stock Length Springer Front End For Harley Sportster Chopper Softail Arched
22 Stock Length Springer Front End For Harley Sportster Chopper Softail Arched
22 Stock Length Springer Front End For Harley Sportster Chopper Softail Arched
22 Stock Length Springer Front End For Harley Sportster Chopper Softail Arched
22 Stock Length Springer Front End For Harley Sportster Chopper Softail Arched
22 Stock Length Springer Front End For Harley Sportster Chopper Softail Arched
22 Stock Length Springer Front End For Harley Sportster Chopper Softail Arched
22 Stock Length Springer Front End For Harley Sportster Chopper Softail Arched

22 Stock Length Springer Front End For Harley Sportster Chopper Softail Arched
You may also like. Stock Length 22 Black Springer Front End For Harley Sportster Chopper Softail Arched. Improtant: Measure from the bottom neck bearing down to the axle. As a reference, on this springer that measurement is 22, considered as the stock size. Heavy duty, one piece forged rear legs. Improved durability for front rear legs. Precision fit bronze rocker bushings for long life. TIG welded alloy steel construction for strength and durability. 9.5 between rockers where the axle goes between. Includes a 1″ diameter steering stem, 3/4″ diameter axle, and wheel spacers. You can run other wheels (Narrow Glide, etc) but you will need to cut your own wheel spacers in order to do so. The top tree accepts 1/2″-20 fine thread risers and the riser spacing is 4.75″ center to center (same as OEM Harley Springers) keep that in mind when purchasing handlebars. 2004 & newer Harley Sportsters because of turning radius and fork lock interference. Dyna wide glide or narrow glide. Thank You For Your Business. Please keep the return item(s) in their retail packaging as if new. We are unable to accept any items that have been used or unable to resell. Submit A Claim In Just 3 Easy Steps. Step 2: Send the item back or send us pictures for testing and inspection. What Is Not Covered. Physical damage caused by abuse or misuse. Failures due to fire or water. Damage caused from installation. We are committed to resolve all issues in a friendly and satisfactory manner. If you do not get a response from us, please kindly check your junk or spam mailbox. The item “22 Stock Length Springer Front End For Harley Sportster Chopper Softail Arched” is in sale since Wednesday, March 31, 2021. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Fairings & Body Work”. The seller is “finestlifeever” and is located in Ontario, California. This item can be shipped worldwide.
  • Brand: HTTMT
  • Manufacturer Part Number: FM-TGHD-SF001-II-BK

22 Stock Length Springer Front End For Harley Sportster Chopper Softail Arched

Chrome Springer Front End +6 Length Harley Davidson Sportster Bobber Chopper dna

Chrome Springer Front End +6 Length Harley Davidson Sportster Bobber Chopper dna
Chrome Springer Front End +6 Length Harley Davidson Sportster Bobber Chopper dna
Chrome Springer Front End +6 Length Harley Davidson Sportster Bobber Chopper dna
Chrome Springer Front End +6 Length Harley Davidson Sportster Bobber Chopper dna
Chrome Springer Front End +6 Length Harley Davidson Sportster Bobber Chopper dna
Chrome Springer Front End +6 Length Harley Davidson Sportster Bobber Chopper dna
Chrome Springer Front End +6 Length Harley Davidson Sportster Bobber Chopper dna
Chrome Springer Front End +6 Length Harley Davidson Sportster Bobber Chopper dna
Chrome Springer Front End +6 Length Harley Davidson Sportster Bobber Chopper dna
Chrome Springer Front End +6 Length Harley Davidson Sportster Bobber Chopper dna
Chrome Springer Front End +6 Length Harley Davidson Sportster Bobber Chopper dna
Chrome Springer Front End +6 Length Harley Davidson Sportster Bobber Chopper dna

Chrome Springer Front End +6 Length Harley Davidson Sportster Bobber Chopper dna
Moto Iron brand, Chrome +6 Over Stock Length Harley Springer Front End. Moto Iron has been successful in producing a high quality springer front end that is affordable to all bike builders. With its heavy duty, one piece forged rear legs and beefy 1 diameter front legs, these springers offer a high strength level of quality at a price that cannot be beaten. When viewing next to leading competitors, the differences were easy for us to see why they are the better choice. Not for use on Dyna or FLT Touring Models. Heavy duty, one piece forged rear legs. 1 diameter front legs for improved durability. Precision fit bronze rocker bushings for long life. Zinc plated axle and steering stem to prevent corrosion. Triple chrome plated or black powdercoated finishes. They include a 1″ diameter steering stem, 3/4″ diameter axle, and wheel spacers. The included wheel spacers are designed to fit Harley Wide Glide wheels. From 1984 – 1999. They work with a 11.5 Harley brake rotor. (84-99), and Springer type brake calipers. You can run other wheels Narrow Glide, etc… But you will need to cut your own wheel spacers in order to do so. The top tree accepts 1/2-20 fine thread risers. And the riser spacing is 4.75 center to center (same as OEM Harley Springers) keep that in mind when purchasing handlebars. These will not fit the following bikes. 2004 & newer Harley Sportsters because of turning radius and fork lock interference. Dyna wide glide or narrow glide. Harley FLT Touring Models (Electra Glide, Street Glide, Road Glide, Road King, Ultra, etc). SHOP AT TC BROS. World Class Tech Support & Customer Service. The item “Chrome Springer Front End +6 Length Harley Davidson Sportster Bobber Chopper dna” is in sale since Wednesday, March 10, 2021. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Brakes & Suspension\Complete Suspension Units”. The seller is “tcbros” and is located in Wauseon, Ohio. This item can be shipped worldwide.
  • Manufacturer Part Number: 113-0075
  • Placement on Vehicle: Front
  • Brand: Moto Iron

Chrome Springer Front End +6 Length Harley Davidson Sportster Bobber Chopper dna

Black Springer Front End +8 Over Stock Length For Harley & Custom Bikes New

Black Springer Front End +8 Over Stock Length For Harley & Custom Bikes New

Black Springer Front End +8 Over Stock Length For Harley & Custom Bikes New
High Quality Products only. HARLEY SPRINGER FRONT END +8 oVER STOCK LENGTH FOR HARLEY & CUSTOM FRAMES. HARLEY SPRINGER FRONT END +8 OVER STOCK LENGTH FOR HARLEY & CUSTOM FRAMES. SPRINGER INCLUDES 3/4 AXLE WITH ALL SPACERS AND HARDWARE. BRAKE APPLICATION IS SET UP FOR A DUAL OR SINGLE BRAKE CALIPER & WILL ONLY WORK W/ SPRINGER BRAKE CALIPERS. NOTE: SPRINGER WILL NOT WORK ON 2004 SPORTSTERS ABOVE OR ANY DYNA MODELS. SPRINGER DOES NOT REQUIRE A FORK STOP KIT. If there is a issue with your order we will try to contact you as soon as possible. Item must not be used, mounted, or damaged and in sale-able condition. Mototeks is not responsible for any charges for labor, repairs, materials, down-time or lost profits due to returning any merchandise. Also, provide us with the invoice number, order number, and order date. Mototeks has continuously supplied top of the line after-market products parts for the powersport industry for over 15 years. We strive in providing the best customer service experience as well as quality after-market parts. We appreciate your business and look forward to doing business with you. Join Our Exclusive Newsletter For Up To Date News, Special Offers And New Arrivals. Speak to a Mototeks Sales Rep. The item “BLACK SPRINGER FRONT END +8 OVER STOCK LENGTH FOR HARLEY & CUSTOM BIKES NEW” is in sale since Thursday, February 25, 2021. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Brakes & Suspension\Complete Suspension Units”. The seller is “mototeks” and is located in Los Angeles, California. This item can be shipped worldwide.
  • Surface Finish: Black
  • Manufacturer Part Number: Does Not Apply
  • Placement on Vehicle: Front
  • Brand: Mototeks
  • Warranty: 1 Year

Black Springer Front End +8 Over Stock Length For Harley & Custom Bikes New

Harley Springer Front End -4 Under Stock Length For Harley & Custom Frames New

Harley Springer Front End -4 Under Stock Length For Harley & Custom Frames New
Harley Springer Front End -4 Under Stock Length For Harley & Custom Frames New
Harley Springer Front End -4 Under Stock Length For Harley & Custom Frames New
Harley Springer Front End -4 Under Stock Length For Harley & Custom Frames New
Harley Springer Front End -4 Under Stock Length For Harley & Custom Frames New

Harley Springer Front End -4 Under Stock Length For Harley & Custom Frames New
High Quality Products only. SPRINGER INCLUDES 3/4 AXLE WITH ALL SPACERS AND HARDWARE. BRAKE APPLICATION IS SET UP FOR A DUAL OR SINGLE BRAKE CALIPER & WILL ONLY WORK W/ SPRINGER BRAKE CALIPERS. NOTE: SPRINGER WILL NOT WORK ON 2004 SPORTSTERS ABOVE OR ANY DYNA MODELS. SPRINGER DOES NOT REQUIRE A FORK STOP KIT. If there is a issue with your order we will try to contact you as soon as possible. Item must not be used, mounted, or damaged and in sale-able condition. Mototeks is not responsible for any charges for labor, repairs, materials, down-time or lost profits due to returning any merchandise. Also, provide us with the invoice number, order number, and order date. Mototeks has continuously supplied top of the line after-market products parts for the powersport industry for over 15 years. We strive in providing the best customer service experience as well as quality after-market parts. We appreciate your business and look forward to doing business with you. Join Our Exclusive Newsletter For Up To Date News, Special Offers And New Arrivals. Speak to a Mototeks Sales Rep. The item “HARLEY SPRINGER FRONT END -4 UNDER STOCK LENGTH FOR HARLEY & CUSTOM FRAMES NEW” is in sale since Thursday, February 25, 2021. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Brakes & Suspension\Complete Suspension Units”. The seller is “mototeks” and is located in Los Angeles, California. This item can be shipped worldwide.
  • Surface Finish: Chrome
  • Manufacturer Part Number: Does Not Apply
  • Placement on Vehicle: Front
  • Brand: Mototeks
  • Warranty: 1 Year

Harley Springer Front End -4 Under Stock Length For Harley & Custom Frames New

Black Springer Front End +6 Length Harley Davidson Shovelhead Bobber Chopper dna

Black Springer Front End +6 Length Harley Davidson Shovelhead Bobber Chopper dna
Black Springer Front End +6 Length Harley Davidson Shovelhead Bobber Chopper dna
Black Springer Front End +6 Length Harley Davidson Shovelhead Bobber Chopper dna
Black Springer Front End +6 Length Harley Davidson Shovelhead Bobber Chopper dna
Black Springer Front End +6 Length Harley Davidson Shovelhead Bobber Chopper dna
Black Springer Front End +6 Length Harley Davidson Shovelhead Bobber Chopper dna
Black Springer Front End +6 Length Harley Davidson Shovelhead Bobber Chopper dna
Black Springer Front End +6 Length Harley Davidson Shovelhead Bobber Chopper dna
Black Springer Front End +6 Length Harley Davidson Shovelhead Bobber Chopper dna
Black Springer Front End +6 Length Harley Davidson Shovelhead Bobber Chopper dna
Black Springer Front End +6 Length Harley Davidson Shovelhead Bobber Chopper dna
Black Springer Front End +6 Length Harley Davidson Shovelhead Bobber Chopper dna

Black Springer Front End +6 Length Harley Davidson Shovelhead Bobber Chopper dna
Moto IronT brand, Black +6 Over Stock Length Harley Springer Front End. Moto IronT has been successful in producing a high quality springer front end that is affordable to all bike builders. With its heavy duty, one piece forged rear legs and beefy 1 diameter front legs, these springers offer a high strength level of quality at a price that cannot be beaten. When viewing next to leading competitors, the differences were easy for us to see why they are the better choice. Not for use on Dyna or FLT Touring Models. Heavy duty, one piece forged rear legs. 1 diameter front legs for improved durability. Precision fit bronze rocker bushings for long life. Zinc plated axle and steering stem to prevent corrosion. Triple chrome plated or black powdercoated finishes. They include a 1″ diameter steering stem, 3/4″ diameter axle, and wheel spacers. The included wheel spacers are designed to fit Harley Wide Glide wheels. From 1984 – 1999. They work with a 11.5 Harley brake rotor. (84-99), and Springer type brake calipers. You can run other wheels Narrow Glide, etc… But you will need to cut your own wheel spacers in order to do so. The top tree accepts 1/2-20 fine thread risers. And the riser spacing is 4.75 center to center (same as OEM Harley Springers) keep that in mind when purchasing handlebars. These will not fit the following bikes. 2004 & newer Harley Sportsters because of turning radius and fork lock interference. Dyna wide glide or narrow glide. Harley FLT Touring Models (Electra Glide, Street Glide, Road Glide, Road King, Ultra, etc). SHOP AT TC BROS. World Class Tech Support & Customer Service. The item “Black Springer Front End +6 Length Harley Davidson Shovelhead Bobber Chopper dna” is in sale since Monday, March 1, 2021. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Brakes & Suspension\Complete Suspension Units”. The seller is “tcbros” and is located in Wauseon, Ohio. This item can be shipped worldwide.
  • Brand: Moto Iron
  • Placement on Vehicle: Front
  • Manufacturer Part Number: 113-0074

Black Springer Front End +6 Length Harley Davidson Shovelhead Bobber Chopper dna